Hardware
TX9 Specifications
WIFI Not Connecting, Keep saying Saved
If your WiFi connection shows "Saved" instead of "Connected," try these troubleshooting steps: Ensure no Ethernet cable is attached to the media player if you’re trying to connect via WiFi. Double-check that you’re entering the correct WiFi password. ...
Signage Droid Z10 Media Player (Setup Instructions)
Virtual Memory Increasing due to Delivery Optimzation Settings Issue - Windows 11
1. Right click Start Button or press Windows Key + X keys & select Settings. 2. In Settings app, go to Update & Security > Delivery Optimization. 3. Under Delivery Optimization, turn Off the Allow downloads from other PCs option. 4. Close Settings ...
Guide: Daisy Chain 2x2 Displays (Samsung TV Model: VM55B-U)
Windows 11 - How to enable Auto Login
If you notice there is no option under Netplwiz Command to Check mark " User must enter a username and password to use this computer" Follow this method to enable that option under NETPLWIZ Method-1: Click Start Button Click Settings Click Accounts ...
Windows 10 is not auto-updating media player time from Windows Time Server
Step-1: Create a batch file with below text using windows notepad and save as .bat extension net stop w32time net start w32time w32tm /resync Step-2: Open Task Scheduler to schedule a task that runs this batch file every 3 hours
Samsung Frame TV Setup
Samsung Frame TV rotate automatically once the screen is rotated in the wall. To install the media player with a Samsung Frame TV follow the steps below Turn on the Media player and attach it with the Samsung Frame TV The TV will ask if the media ...
CAT-5 VGA Extender Troubleshooting Steps
Cat-5 VGA Extender is used in the situation where the screen supports VGA only and is deployed very far from the Media players. The cost for a 30 ft VGA cable is too high as compared to 30 ft Cat-5 cable Media Player must be connected to the Cat-5 ...
How to Turn Off Ambient Light on PHILIPS Display
Press the home button on remote -> Ambilight -> ambilight Style -> Off. Green Ambient light ON Green Ambient Light OFF
How to Register Media Player with the Display/TV Screen?
If you are doing it for the first time: Plug in Signage Droid Z5 media player into the HDMI port of the screen, connect external keyboard and mouse into the USB ports of the media player Plug in Ethernet/CAT5 cable into media player and ensure the ...
Assigning Static IP's on Z5
For Wi-Fi:Please click on the Advanced option and select Static IP and after adding the IP click Connect. For Ethernet:Click on Ethernet IP Mode and select Static IP to add the IP.
Power Saving Feature not working on Windows or Android Media players
The Power saving is not supported on Windows 8/10 or Android OS anymore. As a work around you can use scheduling to play a blank scene or resource on the screen. Power saving is still supported for windows 7: Station: It will power off media player ...
Additional firewall Bypass Information
Servers to bypass on firewall: 1. alpha.edisplaysas.com: 54.213.47.132 2. bravo.edisplaysas.com: 54.213.5.133 3. charlie.edisplaysas.com: 54.213.152.120 The following are conditions which must exist on your network’s firewall: IP address ...
How to Enable/ Disable Wi-Fi and Ethernet on Signage Droid Z5
Connect a USB Mouse to Signage Droid Z5 and Click on Setting Icon To Enable: Move the Bar Right on Wi-Fi and Ethernet settings. To Disable: Move the Bar Left on Wi-Fi and Ethernet settings.
Signage Droid Z5 Media Player - Setup Instructions
Please follow these steps for the first time setup when you receive the Signage Droid Z5: Please download the Signage Droid Z5 setup instructions that came in the box from link below: Signage Droid Z5_Setup Instructions.pdf
Guide: Daisy Chain 2x2 Display (Phillips & Viewsonic)
There are 2 methods to setup Daisy chain: Method-1: (Recommended) Hardware Requirements: Media player with standard Display port 1.2 supported graphic card that supports 4 screen in 4k resolution ( PNY Quadro K620 or AMD RADEON HD 7750 with Standard ...
Alternate way to setup LIVE TV with Windows OS
Note: We only certify Avermedia AVerTV Volar Hybrid Q H837 for Live TV setup and do not guarantee any other USB TV dongle would work with this method. For Hardware setup instruction please follow this link ...
How to remove filters from Samsung 400 FPN-2 with Enclosures
The filters on the Samsung screens with enclosures can be replaced by removing the front portion of the enclosure, 4 screws on the top and 4 screws at the bottom. When its unscrewed the front portion can be remove. The back portion that has the LCD ...
Signage Droid Z5 - Lost the power adapter
Please buy any regular power adapter with following specifications: 5V 2.5A DC IN 4.0*1.7mm,1.2m Polarity: Note: While purchasing locally, please carry the faulty power adapter to match the yellow power jack output-pin.
No Signal on Samsung 400 FPN-2
Select the correct source: Clicking on Source button on remote control multiple times until you see " Magic Info"
How to rotate a screen orientation on Signage Droid Z5
1. Please take your mouse to bottom of the screen, click and pull up the taskbar. 2. Click on rotate screen button to change orientation. 3. Click on to hide the taskbar.
Minix Z64W , Asking for Windows 8.1 Activation
During Initial setup if Minix Z64W media player asks for windows activation a simple reboot or power cycle will fix the problem.
How to configure Media Player
The Media players are pre-configured, please follow the setup instructions that come with Signage Droid Z5. For further help, please contact our support team at support@edisplayinc.com.
Signage Droid Z5: Check MAC Address and IP
What actions to be taken if media player gets held or stops responding?
Our Signage Player restarts all the connected media players once in every 24 hours to keep the players healthy. In case any media player shows an unforeseen behavior, we recommend to restart it using the power button. For further help, please contact ...
Unable to boot Built-in computer on Samsung 400 FPN-2
There is a switch available at the back of Samsung 400 FPN-2, to power on LCD. Press the power button i.e. first button at the bottom of the LCD from left. The LCD comes up with "CMOS" and "Mac Address" message but the builtin computer didn't boot to ...
Windows PC media player Loses Screen Orientation and Digital TV Output
It is noticed when Windows OS machine is disconnected from a display and reconnected it loses the graphics settings: 1- Set the Portrait Orientation by rotating to 270 2- Set Graphics Output to digital TV instead of Extended Desktop
Check Serial number for Phillips Screen using a Remote
Press the "info" button on the remote to show the 14 digit(Alpha/Numeric) Serial Number starting with AU on the Screen. Example: AU0B1528000431
Power Saving on Media Players is not working
Due to recent updates on android OS and launch of Windows 8 & windows 10, The power saving feature doesn't work on Media players. How ever if you would like to accomplish a Blank Screen during different intervals of a day on daily or weekly basis you ...
My Media Player keeps Restarting?
Please power on the media player with the power adapter that came in the box and it will not reboot again. Multiple reboots is a known behavior if you are powering the media player via a USB cable from TV, this is not recommended because sometimes ...
Windows Startup Repair - Windows cannot repair this computer automatically
After Frequent power outages or improper shutdown can corrupt windows startup boot record, please follow these steps by attaching keyboard and mouse to fix it manually: click don't send. this will close the top popup windows. click View advanced ...
Signage Droid Z5 - Status Bar Behaviour
By default the system bar will hide when the device is turned on, if you drag to open the system bar it will open the icons as well on the top left and right. If you do not hide the system bar and restart the device it will show the system bar.
How to setup Live TV on Windows OS with Avermedia USB TV Dongle (AVerTV Volar Hybrid Q H837)
Hardware Instructions: Note: We only certify Avermedia AVerTV Volar Hybrid Q H837 for Live TV setup and do not guarantee any other USB TV dongle would work with this method. 1- Plug AVerTV Volar Hybrid Q H837 into USB port 2.0 on Windows based media ...
Windows 10 Creator update failed - insufficient disk space
Turn off hibernation: (free upto 4 GB space) 1- Run-> CMD-> powercfg -h off Delete Software Distribution Download folder: (free upto 7 GB space) 1- Run-> CMD (As Administrator). 2- net stop wuauserv. 3- net stop bits. 4- Delete Folder: ...
How to enable Remote Support on Signage Droid Z5
1- Click on the Remote Support Icon on your desktop. 2- Click on the Assign Button 3- The Droid Z5 is ready for E Display remote support