Unable to boot Built-in computer on Samsung 400 FPN-2

Unable to boot Built-in computer on Samsung 400 FPN-2

  • There is a switch available at the back of Samsung 400 FPN-2, to power on LCD.
  • Press the power button i.e. first button at the bottom of the LCD from left.
  • The LCD comes up with "CMOS" and "Mac Address" message but the builtin computer didn't boot to Windows.
  • This is a known issue on (Samsung 400 FPN-2), if the internet is not working or the Cat 5 cable is not connected the system won't boot.
  • Check both ends of Cat-5 cable i.e. connected to LCD and the Ethernet Switch/Router.
  • Make sure the Ethernet switch and router is connected to the internet.
  • Power off the LCD and power it back on using the switch at the back of the LCD and the power button at the bottom of the LCD/ Remote control.

    • Related Articles

    • Windows Login Screen on Built in computer on Samsung 400 FPN-2

      Its is noticed if the Login screen appears while playing the Menu, even after the registry Fix and GUI fix for Auto admin login is deployed. There could be a network device like POS interfering with the computers. Un-plug the Ethernet cables and ...

    • Lost the Remote Control for Samsung 400 FPN-2

      Turn on Samsung 400 FPN-2, using the switch available at the back of the screen and then using the power button at the bottom of the screen, if the remote control is lost.

    • Samsung Frame TV Setup

      Samsung Frame TV rotate automatically once the screen is rotated in the wall. To install the media player with a Samsung Frame TV follow the steps below Turn on the Media player and attach it with the Samsung Frame TV The TV will ask if the media ...

    • Windows Startup Repair - Windows cannot repair this computer automatically

      After Frequent power outages or improper shutdown can corrupt windows startup boot record, please follow these steps by attaching  keyboard and mouse to fix it manually:  click don't send. this will close the top popup windows. click View advanced ...

    • How to remove filters from Samsung 400 FPN-2 with Enclosures

      The filters on the Samsung screens with enclosures can be replaced by removing the front portion of the enclosure, 4 screws on the top and 4 screws at the bottom. When its unscrewed the front portion can be remove. The back portion that has the LCD ...