How to connect with Ethernet

Step - 1

a - Connect the USB Mouse with Droid Z5 USB port.

b- Connect the Droid Z5 to any TV with an HDMI port and power it on.

Step - 2

a - Right click the mouse to get to the desktop.

b- Click on setting icon

c- Click to turn off WIFI

d- Click to Turn on Ethernet

e- Plug Cat-5 / Cat-6 to into Droid Z5 Ethernet port 

• Related Articles

• How to Enable/ Disable Wi-Fi and Ethernet on Signage Droid Z5

  Connect a USB Mouse to Signage Droid Z5 and Click on Setting Icon To Enable: Move the Bar Right on Wi-Fi and Ethernet settings. To Disable: Move the Bar Left on Wi-Fi and Ethernet settings.

• WIFI Not Connecting, Keep saying Saved

  If your WiFi connection shows "Saved" instead of "Connected," try these troubleshooting steps: Ensure no Ethernet cable is attached to the media player if you’re trying to connect via WiFi. Double-check that you’re entering the correct WiFi password. ...

• Assigning Static IP's on Z5

  For Wi-Fi:Please click on the Advanced option and select Static IP and after adding the IP click Connect. For Ethernet:Click on Ethernet IP Mode and select Static IP to add the IP.  

• How to download / cache content files on Signage Droid Z5 to play in Offline Mode

  Signage Droid Z5 supports both Online / Offline modes.It does work and play content files without internet connection.  Note: Internet connection is only required when registering Droid Z5 for the 1st time OR to update any changes (Images, Videos ...

• Unable to boot Built-in computer on Samsung 400 FPN-2

  There is a switch available at the back of Samsung 400 FPN-2, to power on LCD. Press the power button i.e. first button at the bottom of the LCD from left. The LCD comes up with "CMOS" and "Mac Address" message but the builtin computer didn't boot to ...